Pressure Swing Desiccant Compressed Air Dryer

March 23, 2019 | By Kaito-Admin
0

Cooling water temperature: 2-34℃
Cooling water pressure:0.2-0.6Mpa
Dew point: -20℃~ -40℃
Regeneration Air Consumption≤1%
Cycle Time:8 hours standard cycle
Pressure loss ≤0.04Mpa

●Standard air handling condition:Air inlet pressure : 0.7MPa; Air inlet temperature:120℃；Cooling water temperature:30℃；Average regeneration air volume≦1%；

●More air capacity or special specifications requirements, please consult the technician from HIROSS.

●The information is only for reference, without legal significance, the actual configuration and the data information, please according to the contract signed by both parties.

Continue Reading

Heatless Regenerative Compressed Adsorption Air Dryer

March 23, 2019 | By Kaito-Admin
0

Heatless Regenerative Compressed Adsorption Air Dryer
Inlet temperature≤40℃
Environment temperature≤40℃
Adsorbent activated alumina or molecular sieve
Pressure dew point -20-40℃
Regeneration gas consumption 12%-15%
Control type time control of full electronic programmable
Inlet oil content≤0.1mg/m3
Work pressure 0.4-0.98Mpa

1.Pneumatic valve

Trouble-free operation more than 100,000 times,reliable quality with long service life

2.Stick quality standard

Our regenerative desiccant air dryer are manufactured in strict accordance with the pressure vessel regulations,they are designed, manufactured and inspected in strict accordance with ISO quality management system and GB150.

3.Easy use

Computer board intelligent automatic control, simple and easy operation.

Continue Reading

Air Dryer High temperature Inlet (Water Cooled Type)

March 23, 2019 | By Kaito-Admin
0

Water Cooling Refrigerated Air Dryer for Compressor (High temperature type)
Inlet Air Temperature: ≤80℃ or 208 ℉
AmbientTemperature: ≤40℃ or 104 ℉
Operating Pressure: 0.4~1.0MPa
Pressure Loss: ≤0.02MPa
Freezing Medium (Refrigerant): R-22 ,R407C,R410
Cooling Water Temperature: 2-34℃ or 35.6~93.2℉
Coiling Water Pressure: 0.2~0.6MPa
Pressure Dew Point: 2 ~ 10℃ or 35.6 ~ 50 ℉

1.Stable performance:stable outlet dew point,without any ice block and moisture.

2.Reliable operation:Good quality parts,simple design and high efficiency refrigerated control system.

3.Simple to install:single connector,automatic adjust system,less time to maintance and without replace any parts.

4.High efficiency:improve air tool and others equipment's service life, reduce pipe leak and power drop, low the moisture's effect.

Continue Reading

Compressed air dryer – High Pressure Series

March 23, 2019 | By Kaito-Admin
0

Inlet temperature: ≤80°C
Ambient temperature: ≤40℃
Refrigerant: R-22, R134a, R407C for optional
Pressure dew point: 2-10℃
Cooling type: Air cooling
Work pressure: 1.0-3.0Mpa
Pressure loss: ≤0.02Mpa

High Pressure Compressed Air Dryer

1) For air cooling type air dryer

Model AC Series
Brand Hiross
Air Flow /Capacity 1~80 Nm3/Min
Power Supply 220V/50HZ; 380v/50hz; Or Customization
Cooling Mode Air Cooling
Max. Inlet Temp. 80 ℃
Max. Ambient Temp. 40 ℃
Refrigerant R-22,R134a, R407C, R410 For Optional
Pressure Dew Point 2-10 ℃
Work Pressure ＞1.0Mpa
Pressure Loss ≤0.02Mpa
Certificate: ISO ,CCS

2) For water cooling type air dryer

Model WHP Series
Brand Hiross
Air Flow /Capacity 11~600 Nm3/Min
Power Supply 220V/50HZ; 380v/50hz; Or Customization
Cooling Mode Water Cooling
Max. Inlet Temp. 80 ℃
Max. Ambient Temp. 40 ℃
Refrigerant R-22, R134a, R407C, R410 For Optional
Pressure Dew Point 2-10 ℃
Work Pressure ＞1.0Mpa
Water Cooling Temp. 2-34℃
Pressure Loss ≤0.02Mpa
Certificate: ISO ,CCS

Please feel free to contact me with more detailed specifications.

Continue Reading

Compressed air dryer – Low Inlet Temperature

March 23, 2019 | By Kaito-Admin
0

Inlet temperature: ≤45°C
Ambient temperature: ≤40℃
Refrigerant: R-22, R134a, R407C for optional
Pressure dew point: 2-10℃
Cooling type: Air cooling
Work pressure: 0.6-1.0Mpa
Pressure loss: ≤0.02Mpa

◇ Classic, neat and compact structure design.Science and technology aesthetics-specialization.

◇ Pre-cooler of copper gas-gas, the evaporator of copper, more sufficient for exchanging heat.

◇ The best parts, the best design, the longest life.

◇ All electrical intelligence control, no " ice machine", more reliable and save energy.

Continue Reading

Compressed air dryer – High Inlet Temperature

March 23, 2019 | By Kaito-Admin
0

Inlet temperature: ≤45°C or ≤80°C
Ambient temperature: ≤40℃
Refrigerant: R-22, R134a, R407C for optional
Pressure dew point: 2-10℃
Cooling type: Air cooling
Work pressure: 0.6-1.0Mpa
Pressure loss: ≤0.02Mpa

Time Proven Design:

Precise design of copper tube heat exchanger increase the heat exchange areas and efficiently drier high pressure air to standard requested low pressure dew point.
Static condenser design: low vibration, quiet operation and trouble free.

Energy Saving Design:

Recycle cold Energy from evaporator to heat exchanger, save power consumption.

Ease of Monitoring:

Electronic(Automatic)Drain Valve.
Safety protection systems for frost, overheat and systems alarm and stop for errors and overworking. Expand Machine Life.
Best Compressor Brands: Panasonic, Copeland, Taikang

1.Pre-cooler (Only for high temperature)
2.Air-to-air heat exchanger
3.Refrigerant evaporator
4.Automatic drain valve
5.Expansion valve or capillary tube
6.Dry filter
7.Refrigerant compressor
8.Condenser

Continue Reading

Heatless Air Dryer

July 3, 2018 | By Kaito-Admin
0

HEATLESS AIR DRYER

FEATURE OF HEATLESS AIR DRYER

・Can supply dry air with a low dew point below –30°C
・Compact and lightweight without a heater or an electric control board
・It is possible to check the outlet dew point with the indicator.
(Self-regenerative type allows for easy maintenance)

 

Catalogs

Continue Reading

Membrane Air Dryer

January 20, 2018 | By Kaito-Admin
40 Comments

MEMBRANE AIR DRYER

FEATURE OF MEMBRANE AIR DRYER

・Possible to easily supply dry air using the hollow fiber membrane.
・Non-fluorocarbon
・Power supply not required
・Compatible with low dew point (–60°C)
・No vibration or heat discharge
・With a dew point indicator

     Features      Catalogs

     Data Download    CAD     Manual      PDF(8.5MB)
Other Data
Safety Instructions　Air Preparation Equipment/Precautions
Model Selection Guide/Quick Reference Guide　Green Procurement (RoHS)

Features

 
■Possible to easily supply dry air using the hollow fiber membrane!

Energy saving Reduced in purge air flow by up to 39 (L/min [ANR])

Cost reduced by up to 21,060 yen/year!

■Space saving                                                                              ■Flexible mounting orientation Easy to install  in narrow spaces!

Total length is shortened Max. 59 mm                                   Series IDG1 

Series IDG30A to 100A

                           

 

SEE MORE FEATURE CLICK BELOW

Features

 

 

Continue Reading

Refrigerant Air Dryer – IDFA SERIES

January 20, 2018 | By Kaito-Admin
42 Comments

REFRIGERANT AIR DRYER SERIES "IDFA"

เครื่องทำลมแห้ง (ระบบน้ำยาทำความเย็น ) รุ่น IDFA

FEATURE OF AIR DRYER "IDFA" SERIES

・EC Directive compliant product (With CE mark)
・Power supply voltage: Single-phase 230 VAC (50 Hz)

・Tolerant of high temperature environment!
・Top of its class in the industry for the large air cooled type
・Energy saving design
・Exhaust heat reduced by 25% at max.
・Ambient temperature increase suppressed.
・Employs a heat exchanger made of high corrosion-resistant stainless steel
・Ambient temperature 45°C at max.
・Inlet air temperature 60°C at max.

    Catalogs    Model Selection Software

Continue Reading

Refrigerant Air Dryer – IDFC SERIES

January 20, 2018 | By Kaito-Admin
45 Comments

REFRIGERANT AIR DRYER SERIES "IDFC"

เครื่องทำลมแห้ง (ระบบน้ำยาทำความเย็น ) รุ่น IDFC

Refrigerated Air Dryer For Use in Southeast Asia IDFC

FEATURE OF AIR DRYER

・Applicable for the high-temperature environments of tropical regions
・Can be used in high-temperature environments
　Ambient temperature : Max. 45℃
　Inlet air temperature : Max. 65℃
　Dew point range : 3℃ to 20℃
・Air flow capacity : 9.2 m3/min (52% increase compared to the current model) 
・Power supply voltage : Single-phase 230 VAC (50 Hz)

    Features     Catalogs      Model Selection Software

Continue Reading