FEATURE MAIN LINE FILTER "AFF"
・Can remove impurities, such as oil, water, and foreign matter, in compressed air,
improve the function of a downstream dryer, extend the life of precision filters,
and prevent problems with the equipment
FEATURE MAIN LINE FILTER NEW "AFF"
・Increase in an air flow capacity due to lower pressure drop contributing to energy saving
- Flow capacity: 14.5 m3/min (ANR)
- Increased by up to 20% compared with the current model
- Pressure drop: 5 kPa or less
・Lightweight: Max. 52% lighter (10.5kg→5.0kg)
Light body weight to thinner stainless steel bowl.
・Space-saving design, Labor-saving in piping!
Water droplets and solid particles can be removed with just one AFF.
A separate filter for removing water droplets (water separator, AMG
series) is not necessary any more. Space and piping work are reduced.
・Easier replacement of the element
Stopper function prevents the bowl from falling
FEATURE WATER SEPARATOR
・Compressed air without water can be obtained.
・Water drop removal ratio: 99%
FEATURE OF MEMBRANE AIR DRYER
・Possible to easily supply dry air using the hollow fiber membrane.
・Non-fluorocarbon
・Power supply not required
・Compatible with low dew point (–60°C)
・No vibration or heat discharge
・With a dew point indicator
| Other Data |
|---|
Energy saving Reduced in purge air flow by up to 39 (L/min [ANR])
Cost reduced by up to 21,060 yen/year!
Total length is shortened Max. 59 mm Series IDG1
Series IDG30A to 100A
SEE MORE FEATURE CLICK BELOW
|
|
FEATURE OF AIR DRYER "IDFA" SERIES
・EC Directive compliant product (With CE mark)
・Power supply voltage: Single-phase 230 VAC (50 Hz)
・Tolerant of high temperature environment!
・Top of its class in the industry for the large air cooled type
・Energy saving design
・Exhaust heat reduced by 25% at max.
・Ambient temperature increase suppressed.
・Employs a heat exchanger made of high corrosion-resistant stainless steel
・Ambient temperature 45°C at max.
・Inlet air temperature 60°C at max.
Refrigerated Air Dryer For Use in Southeast Asia IDFC
FEATURE OF AIR DRYER
・Applicable for the high-temperature environments of tropical regions
・Can be used in high-temperature environments
Ambient temperature : Max. 45℃
Inlet air temperature : Max. 65℃
Dew point range : 3℃ to 20℃
・Air flow capacity : 9.2 m3/min (52% increase compared to the current model)
・Power supply voltage : Single-phase 230 VAC (50 Hz)
Refrigerated Air Dryer/Double Energy Saving Function
Series IDF100FS/125FS/150FS
・Energy-saving design (Second re-heater + Digital scroll compressor)
・Power consumption: Reduced by up to 76%
・Exhaust heat: Reduced by up to 25%
・Tolerant of high temperature environments!
・Ambient temperature: Up to 45°C, Inlet air temperature: Up to 60°C
High Inlet Air Temperature Type
- Rated inlet air temperature : 55°C
- Applicable air compressor : 2.2 - 75kW
- ECO Friendly use R134 (HFC), R407C (HFC)
- Port Size Range : Rc3/8 - R2
・Can cool high-temperature compressed air from compressors down to
40°C or less and efficiently remove moisture from the air
・Cooling equipment is not required for this air-cooled type.
・Easy maintenance and reasonable running costs,
No need to worry about freezing or running out of water supply.
| Other Data |
|---|
| Series | Applicable compressor | Air flow capacity L/min (ANR) |
|---|---|---|
| HAA | 7.5 to 37kW | 1000 to 5700 |
・Can cool high-temperature compressed air from compressors down to
40°C or less and efficiently remove moisture from the air
・Stable operation for this water-cooled type is possible even in an environment
with a high temperature, high moisture, and heavy foreign particles.
| Other Data |
|---|
| Series | Applicable compressor | Air flow capacity L/min (ANR) |
|---|---|---|
| HAW | 2.2 to 110kW | 300 to 18000 |
